Open 7days. 6am to 10pm
A pressure washer is a powerful instrument that uses a high-pressure water spray to remove pollutants from surfaces. The objects it removes may include mould, moss, mildew, loose paint, grease and grime. The tool comprises an electric motor or fuel-powered engine that runs a water pump.
Using a flexible high-pressure hose and a trigger pistol, the washer extracts water from any water resource, speeds it up through a pump, and then shoots it out through a very fine nozzle at an extremely high speed. The tremendous force of water thus generated, removes and cleanses residues and filth, leaving surfaces as spick and span as new. .
Frequent pressure washing improves the health and longevity of surfaces by warding off all the filth along with other pathogens and microorganisms. Dirt and grime accumulation can over the time, cause surfaces to deteriorate and age your property prematurely. Therefore, regular pressure cleaning in Melbourne by skilled professionals is a proactive way to maintain the value as well as the look and feel of your property.
Pressure-washing techniques vary depending on the surface. Let’s look at a few typical surfaces:
Ceramic Surfaces
Outdoor areas like patios,decks, walkways, swimming pools etc. frequently include ceramic surfaces, tiles and other washable surfaces. Although they are capable of withstanding high pressure, professionals use all their expertise and experience to avoid using extremely high pressure as this could result in damage.
Glass Surfaces
Windows and doors are examples of glass surfaces that are carefully and meticulously handled by experts from a quality high pressure cleaning service in Melbourne. The spray angle needs to be large enough to distribute the water’s force uniformly, and the pressure needs to be low enough to avoid breaking the glass.
Wooden Surfaces
House pressure wash in Melbourne can harm wood surfaces, such as fences and decks of care is not taken. For a gentle and safe removal of dirt, a broader nozzle and lower pressure are used by experts..
Concrete Surfaces
Because concrete surfaces, like pathways, driveways, can withstand high pressure, cleaning them is relatively simpler. However, use of improper technique may result in surface etching.
Surfaces of Metals
Higher pressure levels can be used while cleaning metal surfaces, such as those of outdoor furniture and equipment. However, care is taken by experts to avoid dents or paint removal while pressure washing.
Important Procedures for Using a Pressure Washer
Let’s quickly go over the general procedures for using a pressure washer before getting into the specifics for each surface:
Setting the Tool Up: The pros attach a power and water source to the pressure washer. For the surface to be cleaned, they attach a nozzle that is suitable.
Pressure Adjustment: They modify the pressure level in accordance with the sensitivity and hardness of the surface.
Test Run: To make sure the pressure is not too strong to cause damage, the experts perform a test run on a tiny, less visible area before beginning.
Cleaning: They use a steady, sweeping motion to spray the surface. To prevent etching or other damage, they stay in one area for a very short time.
Rinsing: After loosening and removing the dirt and grime, they rinse the surface with a broader spray to complete the entire procedure.
So these are the ways they use to clean different surfaces. Book a service from Best Carpet Cleaning Melbourne for the best pressure washing service. Call us at 03 8583 9100 to book a service.
